Alabastrite
Alabastrite
is our product line name for poly resin items. Alabastrite is a stone-based
material which can be intricately molded producing great detail, and will
allow paint to adhere. These items may be cleaned by dusting, however, they
should not be washed with water as they are painted with water soluble
paints.
Bone China
White clay
with bone ash added. Bone ash content must be at least 25% by U. S.
guidelines. Fired at 1800 degrees. The translucent material is finished with
a glaze or under glaze (matte). Lighter, stronger, more expensive than
porcelain.
Capiz Shell
Capiz is a
large, thin translucent shell found in Philippine coastal waters.
Cubic Zircon
The most
successful simulated diamond. Properties such as refraction, hardness, and
specific gravity are remarkably similar to diamonds. Example: 27432. Cubic
zirconia are very hard to distinguish from diamonds; sometimes a jewelers
loop will be needed to see the difference.
Diamond
Extremely
hard, highly refractive colorless or white crystalline of carbon. Diamonds,
like all gemstones, are judged in terms of Carats, or weight (different from
Karats, as in gold purity).
Dolomite
A
magnesia-rich, sedimentary rock resembling limestone, dolomite is either
gray, pink or white in color.
Frosted Acrylic
Acrylic items
are given the French Lilac process, (used on glass), to achieve the
distinctive frosted look. Example: 27205. The drama of frosted glass without
the weight.
Gemstones
Rubies,
sapphires, emeralds and amethysts, often treasured as birthstones, fall
under the category of gemstones. Gemstones are priced and graded by Carat weight.
Gypsum
Gypsum is a
white mineral which is usually used to make Plaster of Paris.
|
Gold
The ultimate
precious metal. Virtually indestructible, amazingly malleable, doesn't rust
or tarnish. Graded by purity; in the U.S. a scale of 24 is used, so 24
Karats (24K) is 100% pure. 18K is 18 parts gold and 6 parts alloy (other
metals), and so on. 10K is the legal minimum for Karat-graded gold. The word
"Plumb" indicates the exact purity of the piece.
Hong Tze
To closely
emulate a special stone found in China which is known for its deep red
color, these items are created using an alabastrite poly resin. Hong Tze
pieces are highly polished, further bringing out the intense, deep red
color.
Jade Porcelain
Jade
porcelain is a type of porcelain made with a finer clay. Usually no glaze or
only a colorless glaze will be applied at the final firing to show off the
very smooth surface and to preserve the translucency. Example: 27112. Jade
Porcelain is used for night lights because of its high degree of
translucency when lit.
Patchwork Items
Unique fabric
or paper prints are applied to the surface of porcelain, dolomite or
poly resin items. After application, 12 layers of lacquer are added and the
item is hand polished to a high gloss between each layer.
Pearl
A smooth,
lustrous, variously-colored deposit formed around a grain of sand in the
shell of a certain mollusk. Pearls may be formed naturally or "cultured"
through an artificial implanting process.
Porcelain
Fine ground
white clay, molded and fired in an oven for eight hours at 1200 degrees.
Finished with a glazed, under glazed, or "bisque" finish. Glazing produces a
high gloss; under glaze produces a matte finish. Bisque is a matte finish
without glaze. After finishing, the item is "cooked" for six hours at 800
degrees.
Sterling Silver
To qualify as
"sterling" a given piece must be composed of a least 92.5% pure silver.
Stoneware
White clay
with fine ground stone. Working with stoneware demands great expertise, and
is in fact becoming a lost art. Stoneware is safe to use in microwave and
conventional ovens.
|